Injin dinki na XY-200 mai aiki da injin dinki mai sauƙin amfani da injin yana da babban karfin juyi da kuma ciyarwa ta hanyar matsin mai, wanda aka haɓaka shi bisa ga XY-1B, kuma yana da aikin juyawar giyar. Mai amfani zai iya zaɓar injin ta hanyar la'akari da ko injin din yana da famfon laka ko kuma an ɗora shi a kan skid.
1. Tsarin Aikace-aikace
(1) Layin Jirgin Ƙasa, Ruwa & Wutar Lantarki, Sufuri, Gada, Tushen Madatsar Ruwa da sauran Gine-gine don Injiniya Binciken Ƙasa
(2) Binciken yanayin ƙasa, Binciken jiki.
(3) Haƙa ramin ƙaramar rami da kuma ramin fashewa.
(4) Ƙaramin haƙa rijiya.
2.Babban Sifofi
(1) Ciyar da mai, inganta ingancin dilling, rage ƙarfin aiki.
(2) Injin yana da tsarin matse ƙwallon sama da sandar kelly mai siffar hexagonal, yana iya yin sake duba ba tare da tsayawa ba. Ingantaccen aiki, sauƙin aiki, aminci da aminci.
(3) An sanye shi da ma'aunin matsin lamba a ƙasan ramin, yana da sauƙin sanin halin da ake ciki a cikin ramin.
(4) Hannun suna taruwa, injin yana da sauƙin aiki.
(5) Tsarin rijiyar dilling yana da ƙanƙanta, ƙaramin girma, nauyi mai sauƙi, mai sauƙin wargazawa da motsi, ya dace don yin aiki a kan fili da tsaunuka
(6) Silinda tsarin gefe guda takwas ne, yana faɗaɗa diamita na silinda, wanda zai iya shiga cikin sandar Kelly mai girman diamita kuma ya dace da watsawa tare da babban ƙarfin juyi.
(7) Injin dizal yana amfani da wutar lantarki.
| 3. Sigogi na asali | ||
| Naúrar | XY-200 | |
| Zurfin haƙa rami | m | 200 |
| diamita na hakowa | mm | 75 |
| Sanda mai aiki da rawar soja | mm | 53X59X4200 |
| diamita na hakowa sanda | mm | 50 |
| Kusurwar hakowa | 0 | 90-75 |
| Girman gaba ɗaya (L*W*H) | mm | 1750x850x1300 |
| Nauyin rig (ƙarfin fashewa) | kg | 550 |
| Motsa bugun jini | mm | 350 |
| Nisa daga rami | mm | 300 |
| Juya saurin vertiacl (matsayi 4) | r/min | 66,180,350,820 |
| bugun ƙwanƙwasa | mm | 450 |
| Matsakaicin saurin motsi sama na sandar axis ba tare da kaya ba | m/s | 0.05 |
| Matsakaicin saurin motsi na ƙasa na sandar axis ba tare da kaya ba | m/s | 0.067 |
| Matsakaicin ƙarfin ciyar da dogara sanda | KN | 15 |
| Matsakaicin ƙarfin ɗagawa na dogara sanda | KN | 25 |
| Matsakaicin ƙarfin fitarwa na axis na dogara | KN.m | 1.8 |
| Diamita na birki | mm | 278 |
| Faɗin shinge | mm | 50 |
| Winch | ||
| Matsakaicin ƙarfin ɗagawa (igiya ɗaya) | KN | 25 |
| Gudun layi mai zagaye (mataki na biyu) | m/s | 0.17,0.35,0.75,1.5 |
| Juya saurin ganga | r/min | 20,40,90,180 |
| Juya diamita na ganga | mm | 140 |
| Diamita na igiyar waya | mm | 9.3 |
| Tsawon igiyar waya | m | 40 |
| Famfon mai | ||
| Module | YBC-12/125 | |
| Matsi na musamman | Mpa | 12.5 |
| Guduwar ruwa | ml/r | 8 |
| Saurin da ba a saba ba | r/min | 800-2500 |
| Nau'i | Silinda ɗaya ta kwance mai aiki biyu | |
| Matsakaicin matsi (injin lantarki) | L/min | 95(77) |
| Matsakaicin matsin lamba na aiki | Mpa | 1.2 |
| Matsayin matsin lamba na aiki | Mpa | 0.7 |
| Diamita na shafi | mm | 80 |
| Bututun piston | mm | 100 |
| Injin wutar lantarki | ||
| Samfurin injin dizal | ZS1115 | |
| Ƙarfin da aka ƙima | KW | 16.2 |
| Gudun da aka ƙima | r/min | 2200 |
| Samfurin mota | Y160-4 | |
| Ƙarfin da aka ƙima | KW | 11 |
| Gudun da aka ƙima | r/min | 1460 |
Q1: Shin kai mai ƙera kaya ne, kamfanin ciniki ko kuma wani ɓangare na uku?
A1: Mu masana'anta ne. Masana'antarmu tana lardin Hebei kusa da babban birnin Beijing, kilomita 100 daga tashar jiragen ruwa ta Tianjin. Muna kuma da kamfanin cinikinmu.
Q2: Kuna mamakin ko kun karɓi ƙananan oda?
A2: Kada ku damu. Ku tuntube mu. Domin samun ƙarin oda da kuma ba wa abokan cinikinmu sauƙi, muna karɓar ƙananan oda.
Q3: Za ku iya aika kayayyaki zuwa ƙasata?
A3: Hakika, za mu iya. Idan ba ku da na'urar jigilar kaya ta kanku, za mu iya taimaka muku.
Q4: Za ku iya yin OEM a gare ni?
A4: Muna karɓar duk umarnin OEM, kawai ku tuntube mu ku ba ni ƙirarku. Za mu ba ku farashi mai ma'ana kuma mu yi muku samfura da wuri-wuri.
Q5: Menene sharuɗɗan biyan kuɗin ku?
A5: Ta hanyar T/T, L/C AT SIGHT, 30% ajiya a gaba, daidaita 70% kafin jigilar kaya.
Q6: Ta yaya zan iya sanya oda?
A6: Da farko sanya hannu kan takardar PI, a biya kuɗin ajiya, sannan mu shirya samarwa. Bayan an gama samarwa, kuna buƙatar biyan sauran kuɗin. A ƙarshe za mu aika kayan.
Q7: Yaushe zan iya samun ambaton?
A7: Yawancin lokaci muna yin muku kira cikin awanni 24 bayan mun sami tambayarku. Idan kuna da gaggawa don karɓar kuɗin, da fatan za ku kira mu ko ku gaya mana a cikin wasiƙarku, domin mu ɗauki fifikon tambayarku.
Q8: Shin farashin ku yana da gasa?
A8: Sai dai kayayyaki masu inganci ne kawai muke bayarwa. Tabbas za mu ba ku mafi kyawun farashin masana'anta bisa ga samfura da sabis mafi kyau.
